Optional Document Processor - Kyocera TASKalfa 181 Operation Manual

Troubleshooting

Optional Document Processor

If Misfeed in DP. Remove original(s) appears and the jam location indicator shown in the illustration
blinks, a paper jam has occurred in the optional document processor. Perform the following procedure to remove
the jammed original(s).
Misfeed in DP .
Remove original (s).
JAM70
9-20
A
1
Remove all of the originals remaining in the original
table.
2
Open the left cover.
3
Remove the jammed original without tearing it.
NOTE:
If the original does happen to tear, remove any
loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.
4
Raise the paper feed unit A.
OPERATION GUIDE