Basic Copying Procedure - Kyocera TASKalfa 181 Operation Manual

Copying Functions

Basic Copying Procedure

Follow the steps as below for basic copying.
Ready to copy .
100%
4-2
Auto Auto
1
Press the Copy key when the Copy indicator is off.
NOTE:
If the machine is in the sleep mode, press the
Power key and wait for the machine to warm up.
2
Place the originals on the platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-25.
3
Select the desired copier's functions to use.
4
Select the copy paper. If Auto is displayed on the
message display, copy paper of the same size as
the original is automatically selected.
1
To change the paper size, press the Paper Select
key to select the desired paper source.
NOTE:
Select paper size manually, if necessary,
instead of using automatic paper selection.
It is possible to disable this auto paper selection
function. For details, refer to.
It is also possible to specify a cassette that will be
selected automatically even without setting any
originals. For details, refer to.
5
Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
6
Press the Start key to start copying.
7
Remove the finished copies from the top tray.
OPERATION GUIDE