Kyocera TASKalfa 181 Operation Manual page 224

Troubleshooting
Error Message
Remove paper from
Top tray. Press GO
Remove paper from
Top tray.
Press START key.
Replace Waste Toner
Box
Reposition
original or
change cassette.
[Reposition
original or
select other paper
cassette.]
Reset all original
in DP.
Set cassette.
[Close paper
cassette.]
9-10
Checkpoints
The output tray capacity is
exceeded during printing.
There are already 250
sheets of paper stored in
the output tray.
There are already 150
sheets of paper stored in
the output tray when the
optional job separator is
installed.
There are already 100
sheets of paper stored in
the output tray when the
optional finisher is
installed.
The output tray capacity is
exceeded during copying.
There are already 250
sheets of paper stored in
the output tray.
There are already 150
sheets of paper stored in
the output tray when the
optional job separator is
installed.
There are already 100
sheets of paper stored in
the output tray when the
optional finisher is
installed.
The waste toner box is full.
The orientations of the
original and the selected
paper are different.
The cassette is not closed
securely.
Corrective Actions
Remove the paper.
Press the Print key. Press
select GO, and then press the Enter
key. Printing will resume.
Note
To cancel printing, select CANCEL,
and then press the Enter key.
Remove the paper.
Replace the waste toner box with a
new one.
Change the orientation of the original.
If you press the Start key without
changing the orientation, copying will
be performed at a 100 % (1:1)
magnification ratio.
Remove the originals from the
optional document processor, return
all the originals into the original table,
and restart copying.
First pull it out and push it all the way
back in.
Reference
Page
—
or to
—
8-9
—
9-20
—
OPERATION GUIDE