Kyocera TASKalfa 181 Operation Manual page 89

Combine :
2 in 1
4 in 1 (Z)
4 in 1 (N)
Border Line:
None
Solid
Dotted
OPERATION GUIDE
3
Press the Combine key.
4
Press or to select the desired combine
copying mode, and then press the Enter key.
5
Press or to select the type of the lines to
indicate page boundaries, and then press the
Enter key.
6
Press the Start key to start scanning.
If the originals have been set in the optional
document processor, copying starts automatically.
If the original has been set on the platen, a
message prompting replacement of the original is
displayed. In this case, proceed to the next step.
7
Replace the original, and then press the Start key.
Scanning of the original is performed.
8
After scanning all originals, press the Enter key to
start copying.
Copying Functions
4
4-21