Rebuild Menu; Check Consistency Menu - Intergraph InterRAID-8e Hardware User's Manual

Rebuild Menu

Choose Rebuild from the Management menu to rebuild one or more failed disk drives.

Check Consistency Menu

Choose this option from the Management menu to verify the redundancy data in logical
drives using RAID levels 1, 3, or 5.
CAUTION Checking consistency could mean loss or corruption of data when an inconsistency is found
and corrected.
When you choose Check Consistency, the parameters of the existing logical drives on the
current controller and a selection menu listing the logical drives by number appear.
Press the arrow keys to highlight the desired logical drives. Press the spacebar to select or
deselect a drive for consistency checking. Press
Press to begin the consistency check. A progress indicator for each selected logical drive
F10
displays.
When the consistency check is finished, press any key to clear the progress display and press
to return to the Management menu.
ESC
to select or deselect all the logical drives.
F2
55