Replacing A Fuse - Intergraph InterRAID-8e Hardware User's Manual

132
4. Using a No. 2 Phillips screwdriver, remove the four screws that secure the fan to the
cooling fan panel, and then remove the failed cooling fan.
5. Remove the new cooling fan from its packaging. Save the packaging material.
6. Align the fan mounting holes with those on the cooling fan panel and secure the fan
using the four screws.
7. Reconnect the in-line connector of the power cable.
8. Close the cooling fan panel and tighten the two screws to secure the panel to the back of
the cabinet.

Replacing a Fuse

WARNING Disconnect power before replacing a fuse.
1. Locate the fuse holder on the back panel of the InterRAID-8e cabinet.
Fuse
Holder
2. Using a small coin or flat blade screwdriver, turn the fuse holder counter-clockwise one
quarter turn, releasing the holder from its locked position; then remove the fuse holder.
3. Separate the fuse from the fuse holder.