Introduction
You must be logged in to the GbE2 Interconnect Switch as the administrator to use the Boot
Options Menu.
The Boot Options Menu provides options for:
•
Selecting a switch software image to be used when the GbE2 Interconnect Switch is next
reset.
•
Selecting a configuration block to be used when the GbE2 Interconnect Switch is next
reset.
•
Downloading or uploading a new software image to the GbE2 Interconnect Switch via
TFTP.
Boot Menu
Command: /boot
[Boot Options Menu]
Each of the Boot Options Menu commands is discussed in greater detail in the following
sections.
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 1:10 PM
image - Select software image to use on next boot
conf
- Select config block to use on next boot
gtimg - Download new software image via TFTP
ptimg - Upload selected software image via TFTP
reset - Reset switch [WARNING: Restarts Spanning Tree]
cur
- Display current boot options
The Boot Options Menu
8
8-1