Mpio Properties Page Before Reboot; Mpio Properties Page After Reboot - HP StorageWorks MPX200 User Manual

3. After the server reboots, add support for iSCSI devices using the MPIO applet
Figure 49).
NOTE:
You must present a virtual disk to the initiator to enable the Add support for iSCSI devices
check box (see Figure
Figure 48 MPIO Properties page before reboot
.
Figure 49 MPIO Properties page after reboot
.
4. Reboot the system to MPIO the devices.
68 MPX200 iSCSI configuration rules and guidelines
48).
(Figure 48 and