Hp Command View Fcoe Ports - HP StorageWorks MPX200 User Manual

3. Create an FCoE zone. Zone the WWNN from the MPX200 FCoE port from each blade and the
host CNA. If multiple fabrics exist, create zones where redundancy requires it. There are two
ways to identify the FCoE ports on the MPX200:
• In HP Command View EVA, see the FC Ports tab of the iSCSI Controller 0X in the Hardware
folder (see Figure
Figure 100 HP Command View FCoE ports
.
• In the CLI, issue the show fc command (see
100):
Figure 101).
MPX200 Multifunction Router User Guide 147