Host Details Display - HP StorageWorks MPX200 User Manual

6. Add FCoE targets to the FCoE zone.
After the first virtual disk/LUN is presented, the FCoE targets are dynamically created and mapped.
In Figure 104, if you mouse over the More icon, a Host Details pop-up appears, showing the
FCoE targets and how they map to the EVA ports. These FCoE WWNNs must be added to the
FCoE zone created in Step 3 on page 147.
NOTE:
This step is not required for subsequent Vdisk/LUN assignments for the same or additional
hosts.
Figure 104 Host Details display
.
MPX200 Multifunction Router User Guide 151