Fru; Help - HP StorageWorks MPX200 User Manual

FRU

Saves and restores the router configuration.
Authority
Syntax
Keywords
Example 1: The following is an example of the fru restore command:
MPX200 <1>(admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the ENTER key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.
Example 2: The following is an example of the fru save command:
MPX200 <1>(admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.

Help

Displays a list of the commands and their syntax.
Authority
Syntax
Example 1: The help command differs for the chassis and the blade. The following example shows
the help command for the chassis:
MPX200 #> help
admin [begin | end | start | stop | cancel]
blade [1 | 2]
exit
help
Admin session to restore
restore
FRU
save
The fru restore command requires that you first FTP the
tar file containing the configuration to the router. When
you issue this command, the system prompts you to enter
the restore level. You can fully restore the router's configur-
restore
ation (all configuration parameters and LUN mappings) or
restore only the LUN mappings. The restored configuration
does not take effect until the router is rebooted.
Creates a tar file containing the blade's persistent data,
configuration, and LUN mappings. The file is stored in the
save
router's /var/ftp directory. You must then FTP the tar
file from the router.
None
help
MPX200 Multifunction Router User Guide 173