HP StorageWorks MPX200 User Manual page 246

#%d: QLIoctlRunDiag: Dia-
106592
gnostic loopback command
failed %x % %x %x
#%d: QLIoctlDisable: Re-ini-
106593
tialize adapter failed
#%d: QLIsrEventHandler: Link
106803
down (%x)
#%d: QLIsrEventHandler: Unex-
pected async event (%x),
106813
MB1=%x, MB2=%x, MB3=%x, MB4=
%x, MB5=%x, MB6=%x, MB7=%x
#%d: QLProcessResponseQueue:
106847
Invalid EntryStatus %x, type
%x
#%d: QLTimer: Heartbeat
106851
failed
#%d: QLTimer: Link error
106853
count (0x%x) exceeded, link
down
#%d: QLReserveLoopId: out of
106912
loop Ids
#%d: QLMarkDeviceOffline:
Device Id: %x marked off-
106928
line, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
#%d: QLSnsGetAllNext: Name
106948
server login FAILED %x
#%d: QLUpdateDeviceData: out
107029
of slots in host database
#%d: QLUpdateDeviceData: out
107030
of slots in target database
#%d: QLUpdateDeviceDatabase
107041
0x%x: GET_ID failed %x
#%d: QLUpdateDeviceDatabase 0x%x:
107056
out of slots in host database
246 Log messages
FC processor failed the external
FC Error
loopback test.
FC processor failed to re-initialize
FC Error in response to an IOCTL disable
request.
FC processor reported a link down
FC Error
condition.
FC processor reported an unexpec-
ted asynchronous event. The mail-
FC Error box registers provide status, event
code, and data related to the
event.
FC controller reported an invalid
FC Error
Entry Status %x, type %x.
FC controller failed to provide a
FC Error
heartbeat.
Driver has determined that the FC
link is unreliable and unusable due
FC Error to the number of errors en-
countered. The link has been taken
down.
FC processor was unable to obtain
the number of loop IDs required.
FC Error This failure occurs only when the
FC processor is running multi-ID
firmware.
Driver was unable to re-establish
connection to the target within the
FC Error
timeout and retry counts, and is
therefore marking it offline.
FC processor is unable to log into
FC Error
the FC fabric name server.
Driver's host (initiator) database is
FC Error
full.
FC Error Driver's target database is full.
Driver's host (initiator) database is
FC Error
full. Maximum hosts is 64.
Drivers host (initiator) database is
FC Error
full.