Restore function allows you to restore the configuration to the point when the configuration was last
saved, which is especially important for single-blade configurations.
NOTE:
A Restore action reboots the blade.
In a dual-blade configuration, a copy of the configuration for each router is kept on the peer. If you
add a new blade, the configuration of the peer blade is copied to the new blade and is ready for
use immediately; no reconfiguration is required.
To save or restore the MPX200 configuration:
1.
Select the desired blade.
2.
Click the Set Options button.
3.
Click the Save Configuration button.
4.
Select the configuration method (see
Figure 27 iSCSI controller configuration selection
.
Locating the MPX200
A flashing blue LED in the center of the blade indicates that the locating beacon is on.
NOTE:
The beacon turns off after 15 minutes.
Figure
27).
MPX200 Multifunction Router User Guide
43