Discover Targets; Add Static Ip Address - HP StorageWorks MPX200 User Manual

2. Run the Xtend SAN iSCSI application to discover and configure the EVA iSCSI targets.
The Xtend SAN iSCSI Initiator can discover targets either by static address or iSNS.
For static address discovery:
a. Click Discover Targets, and then click Discover by DNS/IP
Figure 51 Discover targets
.
b. Enter the static IP address of the mpx iSCSI port in the Address box, and then click Finish
(Figure 52).
Figure 52 Add static IP address
.
c. Select a target from the Discovered Targets list and then click Add
(Figure 51).
MPX200 Multifunction Router User Guide
(Figure 53).
71