Enabling Bidirectional Chap During Discovery Session And Bidirectional Chap During Normal Session; Chap Bidirectional Settings - HP StorageWorks MPX200 User Manual

Enabling bidirectional CHAP during discovery session and bidirectional CHAP
during normal session
Table 15 lists the settings you use to enable bidirectional CHAP during a discovery session and
bidirectional CHAP during a normal session.
Table 15 CHAP bidirectional settings
MPX200 secret settings
Source
iSCSI Port
Discovered iSCSI
initiator
iSCSI Presented
Target
NOTE:
These are examples of secret settings. Configure CHAP using settings that apply to your network
environment.
1. Enable CHAP for the MPX200 discovered iSCSI initiator entry (CHAP can be enabled via CLI
only):
a. If the iSCSI initiator is not listed when you execute the set chap command, do one of the
following:
• From HP Command View EVA, select Hosts and then select the Add Host tab. Enter the
• From the CLI, enter the initiator add command and add the iSCSI initiator that
b. If the iSCSI initiator is listed under the set chap command, enable CHAP secret (for
example: CHAPsecret01).
a.
b.
2. Enable CHAP for the MPX200 iSCSI port:
a. To enable CHAP for the MPX200 iSCSI port using HP Command View:
• Select the appropriate iSCSI Controller, then select the IP Ports tab, and then select the
• Under Security, select Enabled in CHAP Status, and then enter the CHAP Secret (for ex-
• Select the Save Changes tab to save the changes.
b. Enable CHAP for the MPX200 iSCSI port using the MPX200 CLI:
• Enter the set chap command.
• Select the appropriate Portal iqn name index that the initiator logs in to.
• Select 0 to enable CHAP.
• Enter a CHAP secret (for example: hpstorageworks).
Setting (example)
hpstorageworks
CHAPsecret01
hpstorageworks
IQN name string.
performs the discovery.
Select the index of the iSCSI initiator.
To Enable CHAP, select 0, then enter the CHAP secret.
appropriate IP Port.
ample: hpstorageworks).
Microsoft initiator secret settings
Action
General Tab Secret
Add Target Portal
Log on to Target
MPX200 Multifunction Router User Guide
Setting (example)
hpstorageworks
CHAPsecret0
CHAPsecret01
115