Fcip Log Messages - HP StorageWorks MPX200 User Manual

Table 32 FCIP log messages
ID Log Message
#%d: QLTimer: VP %d discover
119144
a reject device PID
%02x%02x%02x
#%d: QLFlashGetNvram: Inval-
120278
id Serial Link Control 0x%x
for port %d
FcipRoute#%d Failed with
139930
Memory Allocation Error
FcipRoute#%d Failed with
139931
Invalid Arg Error
FcipRoute#%d Failed with
139932
Unknown Device Error
FcipRoute#%d Failed with
139933
Kernel Error
FcipRoute#%d Failed with
139934
Network Configuration Error
FcipRoute#%d Failed with
139935
Persistence Read Failure
FcipRoute#%d Failed with
139936
Persistence Write Failure
FcipRoute#%d Failed with IP
139937
Address Reuse Error
FcipRoute#%d Add Failed be-
139938
cause relevant FCIP Licence
not available
256 Log messages
Module Msg
Description
type type
A VP logs in to a device, but the
FC Info
device rejects the login.
Update Nvram for the invalid Serial
FC Info
Link Control for Mez platform.
Memory resources could not be al-
located to an FCIP route. The route
User Error
was not created. The router must be
rebooted to clear this error.
Invalid argument specified by user.
The preceding message in the log
User Error
indicates which parameter is in er-
ror.
Specified route or port (FC/Ethernet)
User Error does not exist. Verify that the value
entered is valid.
Invalid memory address was en-
countered while reading, writing,
User Error
or modifying FCIP route definition.
Reboot the router.
Network device configuration failed;
could not add or remove a network
device instance. Verify the IP ad-
User Error
dresses, mask, gateway, and Ether-
net port specified in the route defin-
ition.
Read of FCIP Route definition from
User Error persistent memory failed. Reboot the
router.
Write of FCIP Route definition to
persistent memory failed. Retry the
User Error
route; add or modify if the retry
failed reboot the router.
Specified IP Address is already in
use in another FCIP route definition.
Verify that the address specified in
User Error the definition is correct. If you want
to reuse the address you will have
to remove it from the other route
definition first.
Router is not licensed for FCIP.
Contact your sales representative
User Error
for information on how to obtain a
license.