A Command Reference; Command Syntax; Command Line Completion; Authority Requirements - HP StorageWorks MPX200 User Manual

A Command reference

This chapter lists and describes the MPX200 CLI commands in alphabetical order.

Command syntax

The MPX200 CLI command syntax uses the following format:
command
The command is followed by one or more keywords. Consider the following rules and conventions:
• Commands and keywords are not case sensitive.
• Required keyword values appear in standard font within brackets: [value].
• Optional keyword values appear in italics within brackets: [value].
• In command prompts, <1> or <2> indicate which blade is being managed.

Command line completion

The command line completion feature makes entering and repeating commands easier.
describes the command line completion keystrokes.
Table 27 Command line completion keystrokes
Keystroke
Tab
Up arrow
Down arrow
Ctrl+A
Ctrl+B

Authority requirements

You must be in an administrator (Admin) session to perform various set commands. Note that:
• Commands for monitoring tasks are available to all accounts.
keyword
keyword [value]
keyword [value1] [value2]
Description
Completes the command line. Enter at least one character and press the Tab key to
complete the command line. If there is more than one possibility, press Tab again
to display all possibilities.
Scrolls backward through the list of previously entered commands.
Scrolls forward through the list of previously entered commands.
Moves the cursor to the beginning of the command line.
Moves the cursor to the end of the command line.
MPX200 Multifunction Router User Guide
Table 27
167