Show Perf - HP StorageWorks MPX200 User Manual

Status Offline
TimeZone Offset (Hours) 0

Show perf

Displays the port, read, write, initiator, or target performance, in bytes per second (b/s).
Authority
Syntax
Keywords
Example 1:
MPX200 <1>#> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s
Number (init_r)
------ --------
GE1 0
GE2 0
FC1 0
FC2 0
Example 2:
MPX200 <1>#> show perf byte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2
--------------------------------
0
0 0
0 0
Example 3:
MPX200 <1>#> show perf init_rbyte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (initiator mode read)... (Press any key to
stop display)
GE1 GE2 GE3 GE4 FC1 FC2
None
show
perf
byte
init_rbyte
init_wbyte
tgt_rbyte
tgt_wbyte
Bytes/s
(init_w)
--------
0
0
0
0
FC1 FC2
0 0
0
0
[byte | init_rbyte | init_wbyte | tgt_rbyte
| tgt_wbyte ]
Displays performance data for all ports.
Displays initiator mode read performance.
Displays initiator mode write performance.
Displays target mode read performance.
Displays target mode write performance.
Bytes/s Bytes/s
(tgt_r) (tgt_w)
-------- --------
0 0
0 0
0 0
0 0
0
0
0
MPX200 Multifunction Router User Guide
Bytes/s
(total)
--------
0
0
0
0
201