Show Fc; Show Fciproutes - HP StorageWorks MPX200 User Manual

HW Version 20694-03 A
SW Version 3.0.1.2
Temp (Front/Rear/CPU1/CPU2) 46C/34C/38C/38C
Power Cooling Module 2
----------------------
Status Installed
Power Source Not Connected
Fan1/Fan2/Fan3 Healthy/Healthy/Healthy

Show FC

Displays FC port information for the specified port. If you do not specify a port, the command displays
all ports.
Authority
Syntax
Keywords
Example:
MPX200 <1>#> show fc 2
FC Port Information
---------------------
FC Port 2
Link Status Up
Current Link Rate 2Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:8b:ef
WWPN 21:00:00:c0:dd:0c:8b:ef
Port ID 00-00-ef
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Loop
Programmed Connection Option Loop Preferred

Show fciproutes

Displays the current settings for a particular FCIP route or for all FCIP routes.
Authority
Syntax
Keywords
Example:
MPX200 <2> (admin) #> show fciproutes
FCIP Route Information
------------------------
FCIP Route
FCIP Interfaces Status
194 Command referencecommand reference
None
[port_num]
show fc
[port_num] Identifies the number of the FC port.
None
show fciproutes [link_id]
Route number to display
[link_id]
1
Enabled