HP StorageWorks MPX200 User Manual page 257

Hp storageworks mpx200 multifunction router user guide (5697-0568, august 2010)
Hide thumbs Also See for StorageWorks MPX200:
Table of Contents

Advertisement

FcipRoute#%d: Cleaning FCIP
172040
Instance
FcipRoute#%d: Did not get
172231
the keepalive msg form re-
mote peer
FcipRoute#%d: Synchroniza-
172238
tion Error on Receive
FcipRoute#%d: Decompression
172239
Error on Receive
FcipRoute#%d: De-encapsula-
172240
tion Error on Receive
FcipRoute#%d: Transmit
172245
Failure
FcipRoute#%d: Remote Peer
172246
Disconnected
FcipRoute#%d: Failed to send
172247
FC Up/Down
172249
FcipRoute#%d: FCIP Link Down
172250
FcipRoute#%d: TCP Link Down
This is an informative message not
FCIP
Error
an error. The message indicates that
an FCIP was removed or modified.
Connectivity with the remote peer
has been interrupted. Check the
FCIP
Error
Ethernet cabling and path to the re-
mote peer.
Indicates an error in the received
FCIP PDU Framing. The router will
FCIP
Error
disconnect and reconnect with the
remote router to clear the error.
Indicates that the receiver could not
decompress a received FCIP frame.
FCIP
Error
The router will disconnect and recon-
nect with the remote router to clear
the error.
Invalid FCIP header received. The
header is invalid or improperly
FCIP
Error
framed. The router will disconnect
and reconnect with the remote
router to clear the error.
FCIP PDU transmit request was rejec-
ted, typically caused by the TCP
connection closing when the send
was submitted. Can also be caused
FCIP
Error
by lack of resources to accommod-
ate the send (should never happen).
If this persists and the TCP connec-
tion is up, a reboot is required to
clear the condition.
The remote peer terminated the TCP
connection via a FIN or RST. The
FCIP
Error
router will attempt to restore the TCP
connection.
Unable to notify the remote router
that the local FC link came up or
FCIP
Error
went down. The TCP connection will
be closed and the router will attempt
to reconnect to the remote router.
The FC link went down. Check the
FCIP
Error
FC cabling and FC switch or drive
statistics.
The TCP link went down. Check the
FCIP
Error
Ethernet cabling and Ethernet switch
or peer device statistics.
MPX200 Multifunction Router User Guide
257

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp20000/xp24000

Table of Contents