Fcip Log Messages - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

Table 36 FCIP log messages
ID Log Message
#%d: QLTimer: VP %d dis-
119144
cover a reject device PID
%02x%02x%02x
#%d: QLFlashGetNvram: In-
120278
valid Serial Link Control
0x%x for port %d
FcipRoute#%d Failed with
139930
Memory Allocation Error
FcipRoute#%d Failed with
139931
Invalid Arg Error
FcipRoute#%d Failed with
139932
Unknown Device Error
FcipRoute#%d Failed with
139933
Kernel Error
FcipRoute#%d Failed with
139934
Network Configuration Er-
ror
FcipRoute#%d Failed with
139935
Persistence Read Failure
FcipRoute#%d Failed with
139936
Persistence Write Failure
FcipRoute#%d Failed with
139937
IP Address Reuse Error
FcipRoute#%d Add Failed
139938
because relevant FCIP Li-
cence not available
FcipRoute#%d: Cleaning
172040
FCIP Instance
FcipRoute#%d: Did not get
172231
the keepalive msg form
remote peer
352 Log messageslog messages
Mod- Mes-
ule sage Description
type type
A VP logs in to a device, but the device rejects
FC Info
the login.
Update Nvram for the invalid Serial Link
FC Info
Control for Mez platform.
Memory resources could not be allocated to
User Error an FCIP route. The route was not created. The
router must be rebooted to clear this error.
Invalid argument specified by user. The preced-
User Error ing message in the log indicates which para-
meter is in error.
Specified route or port (FC/Ethernet) does not
User Error
exist. Verify that the value entered is valid.
Invalid memory address was encountered
User Error while reading, writing, or modifying FCIP route
definition. Reboot the router.
Network device configuration failed; could not
add or remove a network device instance.
User Error
Verify the IP addresses, mask, gateway, and
Ethernet port specified in the route definition.
Read of FCIP Route definition from persistent
User Error
memory failed. Reboot the router.
Write of FCIP Route definition to persistent
User Error memory failed. Retry the route; add or modify
if the retry failed reboot the router.
Specified IP Address is already in use in anoth-
er FCIP route definition. Verify that the address
User Error specified in the definition is correct. If you want
to reuse the address you will have to remove
it from the other route definition first.
Router is not licensed for FCIP. Contact your
User Error sales representative for information on how to
obtain a license.
This is an informative message not an error.
FCIP Error The message indicates that an FCIP was re-
moved or modified.
Connectivity with the remote peer has been
FCIP Error interrupted. Check the Ethernet cabling and
path to the remote peer.