Fujitsu ServerView Virtual-IO Manager V3.1 User Manual page 51

12. Install and configure ServerView Operations Manager and ServerView
Virtual-IO Manager.
On the secondary node:
1. Connect with shared storage.
2. Configure BIOS.
3. Install Hyper-V roles.
4. Install and configure EMC Solutions Enabler (if used).
5. Add a failover clustering function.
6. Create a Hyper-V virtual network.
7. Install Hyper-V roles.
8. Add a failover clustering function.
9. Create a Hyper-V virtual network.
10. Create clusters.
11. Prepare virtual machines.
12. Register virtual machines in clusters.
13. Operate the management station in a cluster.
For details of items 7 to 13, refer to the Hyper-V manual.
If an error occurs on a VM guest, the operation will continue if the VM guest is
switched over.
High availability of VMware HA
To make use of the high-availability functionality of VMware HA, you must
use the operating system VMware Infrastructure 3 with the two concepts
Cluster and Resource Pool.
ServerView Virtual-IO Manager
2.7 High-Availability (HA) support
51