Fujitsu ServerView Virtual-IO Manager V3.1 User Manual page 50

2 Virtual-IO Manager - Introduction
Figure 11: Failover action of the Hyper-V environment to the other cluster node
In the failover clustering of the Hyper-V environment, ServerView
supports the cold migration of virtual machines.
To setup the Hyper-V cluster, proceed as follows:
On the primary node:
1. Connect with shared storage.
2. Configure BIOS.
3. Install Hyper-V roles.
4. Install and configure EMC Solutions Enabler (if used).
5. Add a failover clustering function.
6. Create a Hyper-V virtual network.
7. Create clusters.
8. Prepare virtual machines.
9. Register virtual machines in clusters.
10. Install and configure storage management software.
11. Install and configure VM management software.
50 ServerView Virtual-IO Manager