Table of Contents
Advertisement
4 Configuration
You configure the network parameters of an I/O connection blade as follows:
Activate the Enable DHCP option under Management Port Settings if
l
the connection blade is to receive its IP address from a DHCP server. If
this option is not activated, you must specify the IP address, subnet
mask, and the gateway address.
Click Apply to activate the settings.
l
Configuration using the Remote Manager
You can also configure the network parameters of the I/O connection blades
using the Remote Manager of the management blade.
124
ServerView Virtual-IO Manager
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fujitsu ServerView Virtual-IO Manager V3.1
Related Products for Fujitsu ServerView Virtual-IO Manager V3.1
- Fujitsu ServerView Resource Orchestrator Cloud Edition V3.0.0
- Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0
- Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation
- Fujitsu ATLAS V14
- Fujitsu ServerView Operations Manager V6.12
- Fujitsu ATLAS V14.0
- Fujitsu Lifebook V1030 Guide
- Fujitsu VM2200
Need help?
Do you have a question about the ServerView Virtual-IO Manager V3.1 and is the answer not in the manual?