Fujitsu ServerView Virtual-IO Manager V3.1 User Manual page 103

Configuration using the Remote Manager
You can also configure the network parameters of the I/O connection blades
using the Remote Manager of the management blade.
You configure the network parameters of an I/O connection blade as follows:
In the Remote Manager, choose (1) Management Agent – (6) Con-
l
nection Blade.
Select an I/O connection blade.
l
Make the relevant entries for the following parameters
l
IP Mode Setting Value
o
IP Address Setting Value
o
Subnet Mask Setting Value
o
Gateway Setting Value
o
Activate the settings by clicking Apply Network Setting.
l
ServerView Virtual-IO Manager
4.1 Configurations on the managed BX600 Blade Server
103