Table of Contents
Advertisement
Remove
Active
Backup
Ports configured as active or backup ports are indicated by different col-
ors in the display (light red/light green or dark red/dark green). The name
of the uplink set is assigned to configured ports, which you can rec-
ognize by this.
5.4.2.3 DCB Properties (Edit Uplink Set wizard - single/VLAN network)
DCB Properties is the second step in the Edit Uplink Set wizard if a single
network or a VLAN network is edited.
ServerView Virtual-IO Manager
Assigns the port as a backup port to the uplink set. If the port is
already assigned to another uplink set, this assignment is deleted.
Only available if the port is already assigned to the uplink.
Removes the port assignment from the uplink set.
Only available if the port is configured as Backup.
The corresponding port is configured as active and no longer as
backup.
Only available if the port is configured as Active.
The corresponding port is configured as a backup port and no longer
as active port.
It is only displayed if the connection blade supports DCB (Data
Center Bridging), i.e. for PY CB Eth Switch/IBP 10 Gb 18/8 con-
nection blades.
5.4 Wizards
183
Advertisement
Table of Contents
