Fujitsu Restoring Microsoft Windows® 7 Edition Manual

Restoring Microsoft
®
Windows
In the event that you want to overwrite the existing operating system (OS) on your computer
and/or you would like to install Windows 7, please perform the following procedures.
Restoration of Windows 7 Image:
IMPORTANT NOTE: Prior to beginning the following procedure, be sure to back up the data
on your hard disk. Any data not backed up prior to performing this procedure will be lost.
1. Power on your system. When the Fujitsu logo appears on the screen, press the [Enter] key
or click on the left mouse or touchpad button; a SecureCore™ Menu will appear.
2. Select Boot Menu from the SecureCore Menu.
3. Highlight the CD/DVD option.
4. Insert the bootable disc in your DVD drive, then click [OK].
5. When the System Recovery Options dialog opens, select a new keyboard layout, if neces-
sary, then click [Next].
6. The next System Recovery Option dialog box will have two bullet option. Select the "Use
Recovery Tools ..." bullet, then click [Next].
7. Click on <Recovery and Utility>.
8. Click the Recovery tab in the Recovery and Utility window, then select Restoring the
Factory Image (full hard drive recovery) icon.
9. Click [Execute].
10. Read the precautions, then select "I Agree".
11. Click [Next]. The step-by-step process will be displayed:
1) Recovery Disc Check
2) Initializing hard disk drive
3) Restoring Factory Image to hidden partition
4) Operating System Restoration
12. Click [Next], then click [Execute] to start the recovery process.
13. "1. Recovery Disc Check" will be in bold and the rest will be grayed out. Follow the
instructions and "Insert the Recovery Disc #1". In some cases, you may prompted to
"Insert the Recovery Disc #2", depending upon the size of the Recovery Image.
14. Click [Next] to begin the check. Click [Next] again when the check is complete.
15. "2. Initializing hard disk drive" will be in bold with the message "Please insert the
Bootable Disc into your optical drive". Insert the bootable disc. Click [Next] to proceed.
A dialog box appears, with a checking disc message.
16. "Warning All DATA on the Hard Disk will be completely erased!!!" will appear. Select
[OK]. The partition creation process will begin.
17.
"3. Restoring Factory Image to hidden partition" will be in bold with the message
"Please insert the Recovery Disk#1 into the optical drive". Insert
Fujitsu, the Fujitsu logo, and LifeBook are registered
trademarks of Fujitsu Ltd. Microsoft and Windows are
either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
All other trademarks mentioned herein are the property of
their respective owners.
7 Edition
Recovery Disc#1 and
B6FJ-3971-01EN-00