Fujitsu ServerView Virtual-IO Manager V3.1 User Manual page 19

Managed PRIMERGY rack servers und PRIMERGY tower servers
The following PRIMERGY rack and tower server models are supported:
PRIMERGY Scope of functions
model
RX200 S7 Assign VIOM server profiles with I/O address virtualization
and boot configuration for the onboard LAN ports and the sup-
RX300 S7
ported PCI controller.
RX350 S7
Network connection definition is not supported.
TX300 S7
For information on the BIOS and iRMC firmware version, see the release
notes supplied.
The following PCI controllers are supported for all the above PRIMERGY
rack server systems:
Emulex 10GbE OCe10102 CNA
l
Emulex 8Gb FC HBA LPe 12002
l
Emulex 8Gb FC HBA LPe 1250 (1 channel)
l
INTEL 2-port 10GbE (D2755 – Niantec)
l
INTEL 4-port (D2745 - Barton Hills)
l
INTEL 2-port (D2735 - Kawela 82576NS)
l
INTEL Eth Ctrl 4x1Gb Cu PCIe x4 (D3045)
l
INTEL Eth Ctrl 2x1Gb Cu PCIe x4 (D3035)
l
INTEL 10GbE 10GBase-T(RJ45) PCIe LAN
l
ServerView Virtual-IO Manager
1.3 Supported Hardware
19