Table of Contents
Advertisement
5 Virtual-IO Manager user interface
Figure 40: DCB Properties
Enable DCB
Enables the DCB feature of the connection blade. The DCB (Data
Center Bridging) settings here are specific configuration settings in a
DCB-enabled switching device.
This option should be enabled if this uplink set should be used for FCoE
(Fibre Channel over Ethernet).
Purpose
The purpose of the DCB setting. Possible values are FCoE and iSCSI.
Priority Level
The priority level. Possible values are 0 to 7; for FCoE this is by default
the value 3, for iSCSI the default value is 4.
Bandwidth
The share of the bandwidth in percent that is assigned to this function. If
the sum of all bandwidths of one IO-channel is not 100, the values are
184
ServerView Virtual-IO Manager
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fujitsu ServerView Virtual-IO Manager V3.1
Related Products for Fujitsu ServerView Virtual-IO Manager V3.1
- Fujitsu ServerView Resource Orchestrator Cloud Edition V3.0.0
- Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0
- Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation
- Fujitsu ATLAS V14
- Fujitsu ServerView Operations Manager V6.12
- Fujitsu ATLAS V14.0
- Fujitsu Lifebook V1030 Guide
- Fujitsu VM2200
Need help?
Do you have a question about the ServerView Virtual-IO Manager V3.1 and is the answer not in the manual?