Configuring Igmp Snooping - Fujitsu XG Series User Manual

XG Series User's Guide
4.8.5

Configuring IGMP Snooping

To configure IGMP snooping, carry out the following procedure in "admin" Operation mode.
XG2600# configure
XG2600(config)# igmpsnoop use on
XG2600(config)# vlan 10 igmpsnoop router yes 15,16
XG2600(config)# commit
XG2600(config)# save
XG2600(config)# exit
To enable IGMP query, carry out the following procedure in "admin" Operation mode.
XG2600# configure
XG2600(config)# igmpsnoop use on
XG2600(config)# vlan 20 igmpsnoop querier on
XG2600(config)# commit
XG2600(config)# save
XG2600(config)# exit
Command
Command
Chapter 4 Switch Functions and their Configuration
Switch to Configuration mode.
Enable global IGMP snooping on the device.
Specify the multicast router port statically with VLAN.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
Switch to Configuration mode.
Enable global IGMP snooping on the device.
Specify the Querier operation mode if no multicast router exists.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
82
Task
Task
IGMP Snooping