Time Summer-Time - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.3.4 time summer-time

Function
Available Model
Syntax
Options
Sets summer time/daylight saving time.
Use the no form to return to the default setup.
XG0224 / XG0448 / XG2600
time summer-time <start_day> <end_day> [<offset>]
<start_day>
• Specifies the day/time to start Daylight Saving Time in any form of "Mm.w.d/hhmm,"
"Jn/hhmm," or "n/hhmm."
- Mm.w.d
Specifies the day to start Daylight Saving Time in m, w, and d.
Specify month for m (1 to 12), week for w (1 to 5), and the day of the week for d (0 to 6).
w = 1 means the first week where d exists, and w = 5 means the last week.
d = 0 means Sunday, d = 6 means Saturday.
- Jn
Specifies the day to start Daylight Saving Time in day-of-year (Julian day).
In leap years, February 29th is not counted.
Specify a number in the range of 1 to 365 for n.
- n
Specifies the day to start Daylight Saving Time in day-of-year.
In leap years, February 29th is counted.
Specify a number in the range of 1 to 366 for n.
- hh
Specifies the hour to start Daylight Saving Time.
- mm
Specifies the minute to start Daylight Saving Time.
Specifies the following values, for the first day of each month in "Jn" specification and "n"
specification.
Month/Day
January 1st
February 1st
March 1st
April 1st
May 1st
June 1st
July 1st
August 1st
September 1st
October 1st
November 1st
December 1st
<end_day>
• Specifies the day/time to end Daylight Saving Time.
The description format is the same as <start_day>.
Jn specification
J1 1
J32 32
J60 60
J91 91
J121 121
J152 152
J182 182
J213 213
J244 244
J274 274
J305 305
J335 335
288
Chapter 5 Command Reference
specification
Common year Leap year
1
32
61
92
122
153
183
213
245
275
306
336
Device Information Settings