Lldp Send Hold; Lldp Reinit Delay - Fujitsu XG Series User Manual

XG Series User's Guide
5.9.1.2

lldp send hold

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
5.9.1.3

lldp reinit delay

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set LLDP hold times
XG0224 / XG0448 / XG2600
lldp send hold <count>
<count>
• LLDP hold times
Specify LLDP hold time which neighbor device holds LLDP information of this device.
Specify LLDP hold times with a decimal value from 2 times to 10 times.
This setting corresponds to msgTxInterval in 802.1AB
This setting corresponds to msgTxHold in 802.1AB
Configuration mode (admin class)
Specify LLDP hold time which neighbor device holds LLDP information of this device.
It is assumed that 4 is set for LLDP hold times.
lldp send hold 4
Set LLDP reinit delay time
XG0224 / XG0448 / XG2600
lldp reinit delay <delay>
<delay>
• LLDP reinit delay time
When LLDP send function is disabled, this device sends LLDP information with TTL=0
and after <delay> time, this device reinitializes the internal status.
This setting corresponds to reinitDelay in 802.1AB
Configuration mode (admin class)
When LLDP send function is disabled, this device sends LLDP information with TTL=0
and after <delay> time, this device reinitializes the internal status.
It is assumed that 2sec is set for LLDP reinit delay time.
lldp reinit delay 2s
226
Chapter 5 Command Reference
LLDP Information Settings