Telnetinfo; Mflag - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.4 telnetinfo

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default

5.15.8.5 mflag

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the TELNET connection service.
XG0224 / XG0448 / XG2600
telnetinfo autologout <time>
<time>
• Automatic disconnection time
Specify a time period (from 0 to 86400 seconds (one day)) for the user to be
automatically disconnected when no command input/output processing has been
performed by the client while connected through telnet.
The unit shall be d (day), h (hour), m (minute), or s (second).
Configuration mode (admin class)
Set a time period to disconnect the TELNET connection when no data is input and
output.
It is assumed that TELNET connection input/output is not monitored.
telnetinfo autologout 0s
Set the CE maintenance login.
XG0224 / XG0448 / XG2600
mflag <mode>
<mode>
• on
Specify it when enabling login using a CE-dedicated password.
• off
Specify it when disabling login using a CE-dedicated password.
Configuration mode (admin class)
Set whether or not to permit CE maintenance login.
It is assumed that login with a CE-dedicated password is rejected.
mflag off
302
Chapter 5 Command Reference
Device Information Settings