Table of Contents
Advertisement
XG Series User's Guide
5.33.1.3 show igmpsnoop reporter
Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Display the multicast listener information.
XG0224 / XG0448 / XG2600
show igmpsnoop reporter [<vidlist>]
N/A
Display information about all VLANs with the valid IGMP snooping.
<vidlist>
Specify a VID of VLAN to display the IGMP snooping information.
When specifying multiple VLANs, separate them with commas (,).
Also, when specifying the range, specify them with hyphens (-). (Example: 1-3)
The available description format is as follows:
• To specify values 1, 2, 3, 5 and 7 in the "vidlist"
Example: 1-3, 5, 7
• To specify values 1, 3 and 5 in the "vidlist"
Example: 1, 3, 5
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the multicast listener information being held by IGMP snooping.
# show igmpsnoop reporter 1-3
IGMP Snooping statistics: VLAN 1
#sources: 0
#hosts:
4
Source/Group
------------------------------- ---- --------------- --------
(3)
0.0.0.0
/239.1.1.1
0.0.0.0
/239.1.1.2
0.0.0.0
/239.1.1.3
0.0.0.0
/239.1.1.10
1)
The number of source address information
2)
The number of registered listener information
3)
Source address and multicast group address
4)
Port number
A hyphen (-) shows a group where no listener exists.
5)
IP address to which the Membership-Report has been sent
A hyphen (-) shows a group where no listener exists.
6)
The elapsed time after participation in the multicast group
If no listener exists, a hyphen (-) is shown.
(1)
(2)
Port Reporter
(4)
(5)
1
10.5.20.18
2
10.5.20.31
3
10.5.20.22
3
10.5.20.25
-
-
501
IGMP Snooping Counter, Log, Statistics, and Status Display and Clear
Chapter 5 Command Reference
Join
(6)
1:10:00
1:10:02
1:10:03
1:10:03
-
Operation Commands
Advertisement
Table of Contents
