Fujitsu XG Series User Manual page 550

XG Series User's Guide
NORMAL
HIGHWARNING : The device changes to a high temperature state.
HIGHALARM
UNKNOWN
8) inspiration_temp
Environment temperature.
phy_temp
temperature around PHY.
slot1_temp
temperature around Expansion Card (SLOT1).
At the time of three following states, "--" is displayed.
The Expantion Card without Thermal Sensor is installed. (CX4)
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
9) Slot Information
The type of Expansion Card.
SJ10GCX4Z
SJ10GSFPZ
NO_PRESENT : The Expantion Card is not installed.
UNKNOWN
XG0448
When a CX4 Card is installed in Slot 1 and a SFP+ Card is installed in Slot 2.
# show system status
Current-time
Startup-time
restart_cause
machine_state
power0_state
power_consumption
fan0_state
fan1_state
fan2_state
inspiration_state
phy_state
slot1_state
slot2_state
inspiration_temp
phy_temp
slot1_temp
slot2_temp
Slot Information
slot1
slot2
1) Current time
Present date and time.
2) Startup time
Date and time when the system started up.
: The temperature is normal.
: Thermal alarm occurs in the device.
: There are three following states.
The Expantion Card without Thermal Sensor is installed. (CX4).
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
: Installed Expansion Card is SJ10GCX4Z. (CX4)
: Installed Expansion Card is SJ10GSFPZ. (SFP+)
: Installed Expansion Card is Invalid Card.
: Tue Dec 9 20:43:01 2008
: Tue Dec 9 20:42:48 2008
: power on
: RUNNING
: NORMAL
: 79 W
: NORMAL
: NORMAL
: NORMAL
: NORMAL
: NORMAL
: UNKNOWN
: NORMAL
: 31 C
: 38 C
: -- C
: 29 C
: SJ10GCX4Z
: SJ10GSFPZ
550
Chapter 6 Managing the Device
---(1)
---(2)
---(3)
---(4)
---(5)
---(10)
---(6)
---(7)
---(8)
---(9)
Verifying the Device Operations