Loopdetect Portdisable; Loopdetect Portblock - Fujitsu XG Series User Manual

XG Series User's Guide

5.11.1.2 loopdetect portdisable

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default

5.11.1.3 loopdetect portblock

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the port offline mode.
XG0224 / XG0448 / XG2600
loopdetect portdisable <mode>
<mode>
• yes
Place the port offline automatically.
• no
Do not place the port offline.
Configuration mode (admin class)
Set whether or not to place the relevant port offline when a loop is detected.
If ports are placed offline, release them by the
It is assumed that the ports are not placed offline.
loopdetect portdisable no
Set the port blocking behavior after the Loop detected.
XG0224 / XG0448 / XG2600
loopdetect portblock <mode>
<mode>
• yes
If the Loop detected, the ether port is blocking (without linkdown).
• no
After the Loop detected, the ether port is non-blocking.
Configuration mode (admin class)
Specify the port blocking behavior after the Loop detected.
The blocking port will be non-blocking, if no Loop is detected while recovery monitoring
works on.
The recovery monitoring counter specified by "loopdetect recovery"command and the
monitoring interval is specified by "loopdetect interval"command.
• When the
"loopdetect portdisable"
port blocking function is not work.
• When the STP function is enabled, this port blocking function is not work.
It is assumed that port blocking function is disabled.
loopdetect portblock no
"online"
(loopdetect portdisable yes) command is set, this
231
Chapter 5 Command Reference
command with port releasing.
Loop Detection Information Settings