Stp Information; Stp Mode - Fujitsu XG Series User Manual

XG Series User's Guide
5.8

STP Information

This section explains about STP information.
5.8.1

STP Information

This section explains about the commands related to STP information.
5.8.1.1

stp mode

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the STP (Spanning Tree Protocol) operation mode.
XG0224 / XG0448 / XG2600
stp mode {disable | stp | rstp | mstp }
disable
• Specify when STP is not used.
stp
• Specify when STP (dot1d) is used.
rstp
• Specify when RSTP (dot1w) is used.
mstp
• Specify when MSTP (dot1s) is used.
Configuration mode (admin class)
Set the STP (Spanning Tree Protocol) operation mode.
It is assumed that the STP is set for STP operation mode.
stp mode stp
217
Chapter 5 Command Reference

STP Information