Serverinfo Dns Filter - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.32 serverinfo dns filter

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the application filter for the DNS server function.
XG0224 / XG0448 / XG2600
serverinfo dns filter <count> <action> acl <acl_count>
<count>
• Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
<action>
Specify an operation when filtering conditions are satisfied.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
<acl_count>
• ACL definition number
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be
disabled and ignored.
The following ACL definition is available for application filtering.
• ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Configuration mode (admin class)
Set the application filter for the DNS server function.
It is assumed that the application filter is not set for the DNS server function.
319
Chapter 5 Command Reference
Device Information Settings