Fujitsu XG Series User Manual page 405

Compact, layer 2 switch
Table of Contents

Advertisement

XG Series User's Guide
32)
Number of FCS error frame transmissions of 64 data size bytes or more
The number of frames in which the error detection is done to the "cut-through"
mode in the reception port after it begins to transmit and the transmission
discontinuance is done is contained.
33)
Number of sent frames in which an FCS or FCS alignment error was detected in
the shortsized frames (less than 64 bytes)
34)
Received multicast and number of broadcast frames
35)
Received multicast and number of broadcast frames a second (frames/sec)
36)
Number of discarded frames out of all the received frames
37)
Number of sent multicast frames or broadcast frames
38)
Transmitted multicast and number of broadcast frames a second (frames/sec)
39)
Number of frames abandoned when transmitting
40)
Career undetection error generation frequency
41)
Number of frames in which transmission fails by frequent occurrence of collision
42)
Number of occurrences of late collisions
43)
Number of frames that could be sent after a single collision occurred
44)
Number of frames that could be sent after multiple collisions occurred
45)
Number of frames that got into a transmission deferment because the transmission
path was busy
405
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg0224Xg0448Xg2600

Table of Contents