Ether Duplex - Fujitsu XG Series User Manual

XG Series User's Guide
5.1.1.5

ether duplex

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the full-duplex or half-duplex link mode.
XG0224 / XG0448
ether <number> duplex <duplex>
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
Range
1 to 24 XG0224
1 to 48 XG0448
<duplex>
Full-duplex or half-duplex link mode.
• full
Operates in full-duplex fixed link mode.
• half
Operates in half-duplex fixed link mode.
This option can be specified only when a fixed link speed has been specified by the
"ether mode" command. (This option setting is made invalid if the link speed has been
set to "auto".)
Configuration mode (admin class)
Set the full-duplex or half-duplex link mode on the Ethernet port.
• If "1000" is specified in the
and the system operates in full-duplex link mode.
• If "auto" is specified in the
and the system operates depending on the result autonegotiated with the connected
device.
It is assumed that full-duplex link mode has been specified.
ether <number> duplex full
Model
"ether mode" command, this command setting is disabled
"ether mode" command, this command setting is disabled
94
Chapter 5 Command Reference
Port Information Settings