Serverinfo Http Filter - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.27 serverinfo http filter

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the application filter for HTTP server function
XG0224 / XG0448 / XG2600
serverinfo http filter <count> <action> acl <acl_count>
<count>
• Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority
<action>
Specify the action when the packets match the filter.
• accept
Accept the packets
• reject
Reject the packets
<acl_count>
• ACL definition number
Set the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not set, the filtering definition will be disabled and
ignored.
The following ACL definition is available for application filtering.
- ip
Source IP address and the number of mask bits are used for the filter.
If IP value has not been set, the filtering definition will be disabled and ignored.
- ip6
Source IPv6 address and the prefix length are used for the filter.
If IPv6 value has not been set, the filtering definition will be disabled and ignored.
Configuration mode (admin class)
Set the application filter for HTTP server function
N/A
316
Chapter 5 Command Reference
Device Information Settings