Acl Icmp - Fujitsu XG Series User Manual

XG Series User's Guide

5.12.1.7 acl icmp

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the definition of the ACL ICMP.
XG0224 / XG0448 / XG2600
acl <acl_count> icmp <icmptype> <icmpcode>
<acl_count>
• ACL definition number
Specify an ACL definition serial number with a decimal value.
<icmptype>
Specify ICMP TYPE for ACL.
• ICMP TYPE
Specify the source ICMP TYPE for ACL with a decimal value from 0 to 255.
When specifying multiple ICMP TYPEs, separate them with commas (,).
Using a comma (,) enables you to specify up to 10 ICMP TYPEs.
The available description format is as follows:
- Decimal number from 0 to 255 (Example: 8 = ICMP TYPE 8)
- ICMP TYPE, ICMP TYPE, ... (Example: 0, 8, 30 = ICMP TYPEs 0, 8, and 30)
• any
Specify it when all ICMP TYPEs are subject to ACL.
<icmpcode>
Specify ICMP CODE for ACL.
• ICMP CODE
Specify the source ICMP CODE for ACL with a decimal value from 0 to 255.
When specifying multiple ICMP CODEs, separate them with commas (,).
Using a comma (,) enables you to specify up to 10 ICMP CODEs.
The available description format is as follows:
- Decimal number from 0 to 255 (Example: 8 = ICMP CODE 8)
- ICMP CODE, ICMP CODE, ... (Example: 0, 8, 30 = ICMP CODEs 0, 8, and 30)
• any
Specify it when all ICMP CODEs are subject to ACL.
Configuration mode (admin class)
Specify the ICMP packet pattern in the ACL definition.
When using this command, be sure to specify <protocol> (icmp 1) using the
(icmpv6 58) using the "acl ip6"
Any ICMP packet pattern can be specified in the ACL definition.
command.
240
Chapter 5 Command Reference
"acl ip" or
ACL Information Settings