Table of Contents
Advertisement
XG Series User's Guide
5.1.9.2
ether snmp trap linkup
Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Enable/disable a linkup trap for a specified ether port.
XG0224 / XG0448 / XG2600
ether <number> snmp trap linkup <mode>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
Enable or disable linkup trapping for the specified port(s).
• enable
Enable trapping.
• disable
Disable trapping.
Configuration mode (admin class)
Enable or disable the linkup trap for the specified ether port(s).
The
"snmp trap linkup"
command has a priority over this command.
It is assumed that the linkup trap is enabled.
ether <number> snmp trap linkup enable
150
Chapter 5 Command Reference
Port Information Settings
Advertisement
Table of Contents
