Snmp Linkchange Trap Settings - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Figure 8-3 SNMP Global Settings
The fields that can be configured are described below:
SNMP Global State: Enable or disable the SNMP feature.
SNMP Response Broadcast Request: Enable or disable the server to response to broadcast SNMP GetRequest
packets.
SNMP UDP Port: Enter the SNMP UDP port number.
Trap Global State: Enable or disable the sending of all or specific SNMP notifications.
SNMP Authentication Trap: Tick this option to control the sending of SNMP authentication failure notifications. An
authenticationFailuretrap is generated when the device receives an SNMP message that is not properly authenticated.
The authentication method depends on the version of SNMP being used. For SNMPv1 or SNMPv2c, authentication
failure occurs if packets are formed with an incorrect community string.
Port Link Up: Tick this option to control the sending of port link up notifications. A linkup trap is generated when the
device recognizes that one of the communication links has come up.
Port Link Down: Tick this option to control the sending of port link down notifications. A linkDown trap is generated
when the device recognizes a failure in one of the communication links.
Coldstart: Tick this option to control the sending of SNMP coldStart notifications.
Warmstart: Tick this option to control the sending of SNMP warmStart notifications.
Click Apply to accept the changes made.

SNMP Linkchange Trap Settings

This window is used to configure the SNMP link change trap settings.
Figure 8-4 SNMP Linkchange Trap Settings
25