Pipeline Operation - Fujitsu FR Family Instruction Manual

CHAPTER 5 PRECAUTIONARY INFORMATION FOR THE FR FAMILY CPU
5.1

Pipeline Operation

The FR family CPU processes all instructions using a 5-stage pipeline operation. This
makes it possible to process nearly all instructions within one cycle.
■ Overview of Pipeline Operation
In a pipeline operation the steps by which the CPU interprets and executes instructions are divided into
several cycles, so that instructions can be processed simultaneously in successive cycles. This enables the
system to appear to execute in one cycle many instructions that would require several cycles in other
methods of processing. The FR family CPU simultaneously executes five types (IF, ID, EX, MA, and WB)
of processing cycles, as shown in Figure 5.1-1. This is referred to as five-stage pipeline processing.
• IF:
• ID:
• EX:
• MA:
• WB:
Figure 5.1-1 Example of Pipeline Operation in the FR Family CPU
LD @R10, R1
LD @R11, R2
ADD R1, R3
BNE:D TestOK
ST R2, @R12
●
Processes occurring in each 1 cycle in the above example:
(1) Load instruction "LD @R10,R1"
(2) Interpret instruction "LD @R10,R1" Load instruction "LD, @R11,R2"
(3) Execute instruction "LD @R10,R1" Interpret instruction "LD, @R11,R2"
Load instruction, "ADD R1, R3"
(4) Memory access instruction "LD @R10,R1" Execute instruction "LD, @R11,R2"
Interpret instruction, "ADD R1, R3" Load instruction "BNE:D TestOK"
(5) Write instruction "LD @R10,R1" to register Memory access instruction "LD, @R11,R2"
Execute instruction, "ADD R1, R3" Interpret instruction, "BNE:D TestOK"
Load instruction "ST R2,@R12"
54
Load instruction
Interpret instruction
Execute instruction
Memory access
Write to register
(1) (2) (3)
IF ID EX
IF ID
IF
(4) (5)
MA WB
EX MA WB
ID EX MA WB
IF ID EX MA
IF ID EX
1 cycle
WB
MA WB