Fujitsu FR Family Instruction Manual page 15

Main changes in this edition
Page
Be sure to refer to the "Check Sheet" for the latest cautions on development. is changed.
-
("Check Sheet" is seen at the following support page... is deleted.)
"■ Objectives and intended reader" is changed.
( "FR" → "FR*" )
"■ Objectives and intended reader" is changed.
( " *: " is added. )
i
"PREFACE" is changed.
( "■ Trademark" is added. )
"PREFACE" is changed.
( "The company names and brand names herein are the trademarks or registered trademarks of their
respective owners." is added. )
"Table 2.1-1 Structure of a Vector Table Area" is changed.
9
For 3F8H, ( "No" → "Yes" )
"● Lowest Bit Value of Program Counter" is changed.
18
( "incremented by one, and therefore" → "incremented and therefore" )
"Figure 3.3-4 "ILM" Register Functions" is changed.
20
( A line from ILM to COMP is added. )
"Figure 3.3-7 Sample of Table Base Register (TBR) Operation" is changed.
23
( "31" → "bit31" )
"■ System Stack Pointer (SSP), User Stack Pointer (USP)" is changed.
( "ST R13", "@-R15" → "ST R13, @-R15" )
27
The title of "Figure 3.3-12 Example of Stack Pointer Operation in Execution of Instruction "ST R13", "@-
R15" when "S" Flag = 0" is changed.
( "ST R13", "@-R15" → "ST R13, @-R15" )
The title of "Figure 3.3-13 Example of Stack Pointer Operation in Execution of Instruction "ST R13", "@-
R15" when "S" Flag = 1" is changed.
28
( "ST R13", "@-R15" → "ST R13, @-R15" )
"■ Recovery from EIT handler" is changed.
( "4.2 Basic Operations in "EIT" Processing ■ Recovery from EIT handler" →
28
"■ Recovery from EIT handler"of "4.2 Basic Operations in "EIT" Processing" )
"4.3 Interrupts" is changed.
( "External" → "User" )
37
"■ Sources of Interrupts" is changed.
( "External" → "User" )
Changes (For details, refer to main body.)
xi