Select: Config - Comtech EF Data SLM-5650 Installation And Operation Manual

SLM-5650 Satellite Modem
Front Panel Operation

4.3.1 Select: Config

CONFIG:
The following choices are presented:
Transmit
Receive
Mode
AUPC
Ref
Mask
Reset
Remote
IMPORTANT
Transmit Receive
Ref Mask Reset
Permits the user to configure the Tx parameters.
Permits the user to configure the Rx parameters.
Permits the user to configure the modem operating modes.
Permits the user to configure the AUPC parameters. This menu
only appears if the modem type has been set to AUPC.
Permits the user to configure the modem reference.
Permits the user to mask selected alarms.
Permits the user to reset the modem to a default status.
Permits the user to define whether the unit is being controlled
locally or remotely as well as the communication parameters.
(See Note.)
The modem may be monitored over the remote control interface at
any time. When in Local mode, however, configuration parameters
may only be changed through the front panel.
4–7
Mode AUPC
Remote ( E)
Revision 2
MN/SLM5650.IOM