Sewing Pattern Sequences; Switching The Sequence Programming Mode On/Off - Duerkopp Adler 530 Operating Instructions Manual

8.5.3 Sewing pattern sequence

8.5.3.1 Switching the sequence programming mode on/off

Changeover from the sewing pattern operation to the sewing
pattern sequence operation
–
Actuate the function key "S" while the main menu is being
displayed in order to skip to the sequence programming mode.
–
Start the editing by actuating the "OK" key
–
Select any sequence by using the "ñ" key (1-25)
–
Confirm the selection by actuating the "OK" key.
The sewing pattern sequence operation is switched on.
–
Actuate the key "ESC" or the "ï" key.
The main menu for the sewing pattern sequence operation will be
displayed.
The menu items sequence number and sequence in the main menu will
be described at the end of this section.
0
1
31