8.2 User interface
8.2.1
Structure of menu
Key ESC
Programming mode
Key P
20
Switch on
main switch
Sewing mode
Key P
Key
ESC
Key S
Sequence programming mode
Call up the service mode
–
Press the function key "F" and keep it pressed.
–
Switch on main switch.
The control unit will be initialized.
After a short while the window for entering the code
number will appear.
–
Enter the code number (code 1, compare chapter 8.5.4).
The display changes to the service menu (see also
chapter 8.5.4.3).
Key F
Service mode
Code 1
Key F
Code 1
Technician mode
Key S
Key ESC