Duerkopp Adler 530 Operating Instructions Manual page 56

Input element
S 1
S 2
S 3
S 4
S 5
S 6
S 7
S 8
N-Ref.
X-Ref.
Y-Ref.
54
Input test
With this test function the input element to be tested is selected.
ATTENTION !
The input elements have been carefully adjusted in the factory.
Adjusting and correcting must only be done by trained service staff.
–
Start the test function with the "OK" key .
–
Select desired input element with the keys "ñ" or "ò".
The The switching status of the input element is indicated.
–
Press function key "ESC" for leaving the test function.
The menu Multitest is indicated.
Function
Pedal 1
Pedal 2
Pedal 3
Pedal 4
Hand switch key 1, if the option is activated
Hand switch key 2, if the option is activated
Depending on the activated option and the input configuration
Query clamping foot
Sewing motor reference switch
X-reference switch
Y-reference switch
The recent configuration of the inputs is indicated in the submenu
"Input configuration" of the menu Configuration.
input test
input